HP 8920A Service
Monitor
Amtronix Instruments, Inc. is a large reseller of refurbished HP
8920A units. With over 18 years of experience, we sell, service,
calibrate with data, add and remove options and fully support the
8920A. Call Amtronix Instruments, Inc. at 716-763-9104 or email
rab(at)amtronix.com for your HP /
Agilent 8920A needs.
The HP 8920A Service Monitor is known for accuracy and
dependability. We not only sell but fully support the HP 8920A.
Amtronix Instruments, Inc. Ph 716-763-9104
Avaliable Options:
- 001 High Stability
- 002 Spectrum Analyzer
- 003 HPIB / RS-232 / Current Measurement
- 004 TONE / Digital Signaling
- 005 256k memory (included in newer units without an option
number)
- 006 Low RF power Measurements - Increased accuracy at low
power ranges but limits input power to 5 watts
- 007 Low level RF power measurements (up to 4 watts)
- 008 Cellular RF power Measurements - similar to opt 006 but
008
was only on 8920A units.
- 009 Electronic Attenuator (for 30-1000Mhz operation / standard
on 8920B units after 1996)
- 010 400 Hz High-Pass Filter
- 011 CCITT Weighting Filter
- 012 4 Khz Bandpass Filter
- 013 C-Message Weighting Filter
- 014 6 Khz Bandpass Filter
- 019 Variable Frequency Notch Filter
- 020 Radio Interface Card
- 050 Dual Mode Rear Panel Connectors(for adding Cellular
/
PCS test
adapters)
- 055 Mechanical Attenuator
(standard on HP8920A units before 1999)
- 102 Newer Version Spectrum Analyzer with ACP measurement
- 103 Newer Version HPIB / RS-232 / Current Measurement
- Order Amphanol 350777-1 and 350547-6 (connector body and pins)
to make a DC input cable. Available from Mouser Electronics and others.
- BTS Laptop
Utility Information for use with the 8920A /B
- Decoding DPL
Information
- Save screens to a
memory card & Mem card to 8920
Back to Amtronix
Used Equipment site